Latest News:
|
X-Pole Assembly Video
|
 |
 |
|
Step 1
- Check the contents Remove all the parts from the X-Pole box, lay them out, identify them and check the contents. |
Step 2
- Choose a Pole location Select your pole dancing location, measure the ceiling height and place the X-Pole base in position. |
 |
 |
|
Step 3
- Choose your extensions Use the height chart to select any extensions (if required). |
Step 4
- Locate the ceiling joists Locate the ceiling joists by tapping with a finger or using a stud/joist locator. Adjust the X-Pole base position to mid point between the joists. |
 |
 |
|
Step 5
- Fit the extensions to the base
(if required) Attach any extensions to base insert. Extensions always fit at the bottom of the pole smallest first. |
Step 6
- Attach lower main pole. Screw the lower main pole onto the extension or base insert. Tighten firmly by hand. |
 |
 |
|
Step 7
- Prepare Adjuster rod Take off the adjuster cover tube and wind the adjuster locking nut to the top of the adjuster. |
Step 8
- Fit adjuster Screw the adjuster into upper main dance pole until the nut touches the top of the pole. |
 |
 |
|
Step 9
- Fit adjuster cover Slide adjuster cover into position just covering the O-ring. |
Step 10
- Attach the Upper Dome Slide the upper dome onto adjuster shaft. X-Pole uses a long adjuster shaft with 3 bearings to lock the dome at 90 degrees to the Pole. |
 |
 |
|
Step 11
- Fit the poles together Attach upper pole assembly to lower pole. Screw up tightly and hold vertical. |
Step 12
- Tighten Adjuster Unscrew the adjuster by hand until it is firm against the ceiling. Make sure the upper dome is flat. |
 |
 |
|
Step 13
- Tighten the tubes Using the tightening and release rods tighten the pole sections firmly but not over tight. |
Step 14
- Final check Tighten the X-Pole adjuster with spanner until it is really firm. Check for movement and retighten if there is any movement. |
 |
 |
|
Step 15
- Fit adjuster Cover Slide the adjuster cover up, press in the two sprung pins and lock in place |
Step 16
- Ready to go! After a final check for movement X-pole is ready for use. Where ever it's used X-Pole is up and ready for action in minutes. Enjoy!!!!!!!! |
The X-Pole is very simple to construct, it comes with
a DVD presented by our very own KT Coates.
The pole dancing pole
comes with all the tools necessary to build your very own home dance
pole.
If you are having difficulty please just ask the Vertical Dance team
and we will do all to assist you
.
